The COM series public address mixing amplifiers are providing an ideal solution for small to medium size commercial sound systems.
Different configurations in terms of output power and connectivity provide an enormous flexibility for numerous applications.
The COM12 is capable of delivering an output power of 120 Watt to 100 Volt constant voltage systems or 4 Ohm low impedance loads.

  • Product Information
    • Features

      • Six input channels with individual level control allow connectivity and mixing to a wide variation of music sources.
      • Four balanced microphone inputs (XLR) containing phantom power (15 V) and two priority allow connection for almost any (dynamic or condenser) microphone.
      • Two inputs selectable between stereo balanced line (RCA) and microphone (6.3 mm Jack) allow connection for any source such as CD-player, music computer or portable device, or enable to expand the total microphone count to 6.
      • The remote microphone and tele-paging inputs allow expansion of the system with a paging station (with chime tones) or couple the system with your business telecom system (or any other priority line source).
      • Using the priority mute contact, coupling and muting can be done through an external fire alarm system.
      • The output level can be adjusted using a master volume control accompanied with 2-band tone regulation.
      • The level is indicated with a 5-segment VU-bar while output selection is made possible using an integrated 5-zone speaker switcher.
      • Both table-top installation or 19” (2HE) equipment rack mounting is made possible using the included adapters.

    • Specifications

      RMS Power 120 W
      Signal / Noise > 90 dB
      THD+N (@ 1 kHz) < 0.5%
      Crosstalk (@ 1 kHz) > 70 dB
      Technology Class A/B
      Common mode rejection ratio 70 dB
      Protection DC Short circuit
      Over heating
      Over load
      Signal limiting
      Cooling Convection cooled
      Operating temperature 0° ~ 40° @ 95% Humidity
      Response (± 3 dB) 20 Hz - 20 kHz
      Supply Transformer
      Source 230 ~ 240 V AC / 50 ~ 60 Hz
      Other Remote mic (Priority mic + chime)
      Tele-paging (Priority line)
      Priority mute contact
      Outputs 2-pin Euro Terminal Block (Pitch - 5.08 mm)
      Connector 10-pin Euro Terminal Block (Pitch - 5.08 mm)
      Voltage / Impedance 100 V / 4 Ω
      Balanced Microphone 1 - 4
      Type 4 x Balanced Mic./Line (-6 dB / -50 dB)
      Connector 2 x XLR/Jack Combo & 2 x XLR
      Other 4 x 15 V DC Phantom & 2 x Priority
      Balanced Microphone 5
      Type 1 x Balanced Mic./Line (-6 dB / -50 dB)
      Connector 6.3 mm Jack
      Unbalanced Stereo
      Type 1 x Stereo Unbalanced Line (+14 dB / -30 dB)
      Connector RCA
      Dimensions 420 x 88 x 320 mm (W x H x D)
      Weight 9.700 kg
      Mounting 19” / 2 HE or tabletop
      Construction Steel
      Colours Black

    • Downloads