Prev   Next

iW 6DS


The iW 6DS model is an entry-level in-wall loudspeaker that delivers a big sound in a straightforward and easy to fit package. This two-way design combines 165 mm (6.50”) mid-bass driver with a 25mm titanium dome tweeter in the ultra-rigid iW UV stabilized ABS chassis. The main mid-bass driver boasts long-throw, high efficiency motor system. Its clean and open midband performance is further enhanced through the smooth transition to Tannoy’s Wideband tweeter unit.

 

First developed for high-end hi-fi loudspeakers, Tannoy’s wideband technology uses innovative materials and processing to extend the break-up modes of the tweeter into the very high frequencies. The working, linear performance of the tweeter can then be extended out to over 50kHz, allowing playback of harmonics outside of the audio band that improves the sense of engagement and enjoyment of the music. The iW 6 DS is fitted with a front mounted HF energy switch allowing fine tuning of the HF output by +/-1.5dB.

 

The iW 6DS uses six of Tannoy’s innovative self aligning clamps, designed to allow an extremely secure fit into the wall cavity without the risk of distorting the speaker baffle. Supplied with a white paintable grilles, comprehensive mounting, connection and commissioning information including a cut-out template, the iW 6DS is an affordable in-wall loudspeaker that delivers class leading performance.


Frequency Response (1)

(+/- 3dB) 80Hz - 51kHz

Low Frequency Alignment (2)

(-6dB) 44Hz

Recommended Amplifier Power

20 - 100 Watts/8 ohms

Power Handling (3)

(Average) 75 Watts, (Programme) 150 Watts, (Peak) 300 Watts

Sensitivity 2.38 Volts @ 1 metre (1)

89dB (anechoic), 92dB (half space)

Maximum SPL @ 1 metre (4)

(Average) 108dB, (Peak) 114dB

Impedance

8 ohm

DRIVE UNIT

Dispersion

90°

Driver Complement

1 x 165mm (6 1/2 “) bass driver, 1 x 25mm (1”) titanium tweeter

CROSSOVER

Frequency

2.7kHz

Type

Passive

OPTIONAL THP 60 TRANSFORMER

Maximum SPL (4)

107dB

Wattage Tap Selections

60, 30, 15, 7.5 Watts

CONSTRUCTION

Finish

White - paintable

Connectors

Gold Plated Spring Terminals

Dimensions

(Front Baffle) 320 x 209 x 98mm (12 5/8 x 8 1/4 x 3 7/8”), (Mounting Panel Thickness) 25mm (1”) Maximum

Cut-out Dimensions

271.5 x 168.5 x 93mm (10 11/16 x 6 5/8 x 3 11/16")

Rec. in-wall Mounting Volume

15 litres (0.53 cu.ft.)

Mounting Depth

93mm (3 11/16”)

Coming soon




 

Untitled Document