Prev   Next

iW 62TDC


The iW 62 TDC is Tannoy flagship in-wall speaker in the iW series, combining the abilities and performances of the latest Dual Concentric driver technology, a SuperTweer and an auxiliary bass driver for extended low frequency response. Using a large format chassis built from UV stabilized ABS, the iW 62 TDC leverages the performance of the class-leading iW 6 TDC and adds a second 165 mm (6.50”) bass driver for astounding bass response down to 35Hz.

 

Solidly built and capable of withstanding continuous 120Watts RMS power handling and short term peaks up to four times that power, the iW 6 TDC’s high efficiency design (92dB/Watt) means it is capable of exceptional high peak SPL and outstanding dynamic range. For fine tuning the speaker performance to the room a front mounted switch gives +/- 1.5dB adjustment on the HF output energy.

 

High-end features include the ability to bi-wire or bi-amplify the iW 62 TDC for peak audio performance using the dual pairs of gold plated spring terminals and Tannoy’s unique fifth terminal to ground the driver chassis. This reduces RF in the system, which can reduce the potential for hum and improve sound quality. Eight of Tannoy’s unique self-aligning clamps are used to fit the iW 62 TDC rigidly into the wall cavity, creating a solid and stable platform for the drivers.

 

The iW 62 TDC is a genuine full range in-wall loudspeaker with a linear response from 34Hz to 51kHz, and Tannoy’s renowned sound quality. Ideally suited to larger to larger installations where higher power output is required, the iW 6 TDC offers premium performance for home theatre or multi-room distributed audio systems. Supplied with a white paintable grille and comprehensive fitting instructions, the iW 62 TDC is Tannoy’s flagship iW series in-wall loudspeaker.


System Type

In-wall Loudspeaker

Frequency Response (1)

(+/- 3dB) 75Hz - 51kHz

Low Frequency Alignment (2)

(-6dB) 36Hz

Recommended Amplifier Power

20 - 180 Watts/8 ohms

Power Handling (3)

(Average) 90 Watts, (Programme) 180 Watts, (Peak) 360 Watts

Sensitivity 2.38 Volts @ 1 metre (1)

91dB (anechoic), 94dB (half space)

Maximum SPL @ 1 metre (4)

(Average) 110dB, (Peak) 116dB

Impedance

8 ohm

DRIVE UNIT

Dispersion

90°

Driver Complement

(Supertweeter™) 1 x 25mm (1”) Titanium Dome, (Dual Concentric™) 1 x 25mm (1”) Titanium Dome, 1 x 165mm (6 1/2”) bass driver

CROSSOVER

Frequency

1.8kHz, 16kHz

Type

Passive

OPTIONAL THP 60 TRANSFORMER

Maximum SPL (4)

107dB

Wattage Tap Selections

60, 30, 15, 7.5 Watts

CONSTRUCTION

Finish

White - paintable

Connectors

Gold Plated Spring Terminals

Dimensions

(Front Baffle) 320 x 209 x 104mm (12 5/8 x 8 1/4 x 4 1/8”), (Mounting Panel Thickness) 25mm (1”) Maximum

Cut-out Dimensions

271.5 x 168.5 x 99mm (10 11/16 x 6 5/8 x 3 7/8")

Rec. in-wall Mounting Volume

20 litres (0.7 cu.ft.)

Mounting Depth

99mm (3 7/8”)

Coming soon




 

Untitled Document