Prev   Next

DC8 Ti


The smaller floorstanding loudspeaker in the Definition series, the DC8Ti is capable generating the power and dynamics of a full scale orchestral score yet capable of resolving the smallest details. This commanding loudspeaker for the discerning listener features Tannoy’s latest 200mm (8.00”) Dual Concentric drive unit with WideBand™ tweeter, augmented with a precision matched 200mm (8.00”) inch bass driver. The mid-bass drivers of both units use precision matched cones formed of a Tannoy proprietary paper fibre pulp mix, terminated with a rubber roll surround and bonded to a 44mm edge-wound voice coil.

 

The exceptional rigidity of the port tuned plywood enclosure and extensive use of Tannoy DMT™ material allows the 8” drivers to work in perfect harmony with the 43 litre rear ported enclosure. The Deep Cryogenically Treated straight path crossover, silver plated OFC and pure silver conductors, extensive use of Tannoy DMT™ technology and Tannoy’s unique fifth speaker terminal for driver grounding ensures the DC8Ti’s class leading fidelity and articulation. The extreme power handling of up to 400watt peaks, 90db/Watt sensitivity and bass response down to 33Hz defines the DC8Ti as a truly potent floorstanding loudspeaker.

 

Bold, imposing yet effortlessly elegant, then Definition DC8Ti cabinet is crafted from the finest grade plywood specifically chosen for its natural acoustic properties. The complex curve reduces resonances and internal reflections, improving mid-band clarity and greatly enhancing micro detailing. A special bracing mechanism, incorporating Tannoy’s Differential Material Technology™ (DMT), rigidly couples the driver/enclosure interface, further improving Definition DC8Ti’s accuracy in instrumental timbre.

 

The DC8Ti cabinet is supplied with a new sculpted plinth that visually extends the smooth lines of the design while delivering substantial benefits. It’s top-adjust spikes make for easy set-up and levelling while its integrated energy grounding stabiliser weight ensures the DC8Ti delivers incredibly tight and articulate bass. Each Definition DC8Ti cabinet is hand finished to an exceptionally high standard in a choice of high gloss lacquered real wood veneers or high gloss black with subtle aluminium trim and magnetic grille mount.


The number of bands / Acoustic design

Three-way system / phase inverter with one round rear port

Frequency range

33 Hz - 35000 Hz (-6 dB)

Directivity pattern

90 degrees

Resistance

8 ohms

Sensitivity

89 dB (2.83 volts @ 1 meter)

Recommended amplifier power

30 W (minimum) / 200W (maximum)

Rated power / peak

100 watts (RMS) / 400W (peak)

Tweeter technology Dual Concentric

25mm aluminum dome with a system of Tulip WaveGuid, neodymium magnet.

Woofer technology Dual Concentric

2 x 200 mm corrugated paper cone with rubber surround, patented 44 mm voice coil.

Crossover

250Hz, 1500 Hz (low frequency - the filter of order 2; high frequency - the filter of the 1st order with deep cryogenic treatment).

Dual-cable connection

There, on the ground to the amplifier.

Housing material and finishing

High-density birch MDF, veneer cherry finish (varnish), dark walnut (LAC), black lacquer.

Dimensions (H x W x D)

1025 x 271 x 260 mm

Coming soon


Coming soon




 

Untitled Document