Prev   Next


The Stinger 12 G2 is an active, full-range speaker that is suitable for use in portable PA systems, as a monitor, and in permanent installations.

The 2-way bass reflex design made of sturdy multiplex is loaded with a 12" woofer and a 1" BMS HF driver that attain a high maximum sound pressure level of 118dB (132dB peak). It is powered by the built-in Hypex Ucd400 Class D power amp with a peak power rating of 1600W / 4 ohms. An integral 2-band EQ is provided for tone control. The inputs are XLR/jack combo connectors. The output is an XLR connector. A Speakon-compatible power amp output permits parallel operation of passive speakers and subwoofers.

The hardware includes a stand support that is vertically adjustable by ±13.5° max. in seven increments for optimum orientation, six mounting holes for flyware, and LD "Evolutive" handles. These innovative carrying handles offer a secure grip from all sides for easier transport. Mounting brackets and a protective cover are available as accessories.

Product number: LDEB122AG2
Product type: PA loudspeaker
Type: active
Low/mid driver dimensions: 12"
Low/mid driver dimensions (mm): 304.8mm
Woofer magnet: Ferrite
Woofer brand: Custom-made
Woofer voice coil: 2.5"
Woofer voice coil (mm): 63.5mm
Horn: CD horn
HF driver dimensions: 1"
HF driver dimensions (mm): 25.4mm
HF driver magnet: Ferrite
HF driver brand: BMS
HF driver voice coil: 1"
HF driver voice coil (mm): 25.4mm
Amplifier: Class D, Hypex Ucd400
Dispersion (H x V): 100 x 55°
RMS: 400W
Peak power: 1600W
Frequency response: 58 - 19000Hz
Crossover frequency: 1800Hz
Max. SPL (continuous): 118dB
Max. SPL (peak): 132*dB
Protection circuits: over-current, HF Driver, over voltage
Input sensitivity: - 5dBu
Controls: Treble, Power, Mic Gain, volume, Line Gain, Bass
Indicators: Power, signal, protect (protection circuit engaged), limit
Line inputs: 1
Line input connectors: 6.3 mm Jack, XLR
Mic inputs: XLR, 6.3 mm Jack
Line outputs: 1
Line output connectors: XLR
Loudspeaker outputs: 1
Speaker output connections: Speakon compatible
Minimum impedance of connected speakers: 8Ohm(s)
Operating voltage: Switching Power Supply, 220 V AC - 240 V AC, 50-60 Hz
Cabinet material: 15 mm Plywood
Cabinet surface: texture paint
Cabinet construction: vented
Monitor angle: 54°
Width: 390mm
Height: 570mm
Depth: 370mm
Features: SM707 stand mount 36 mm, 6 x M8 flying points, LD Systems "Evolutive" handles, *Short Term Max. SPL Peak @ 1m with Pink Noise
Weight: 20.9kg



Untitled Document