Next

VA 8


The LD Systems VA8 Array is a 2 x 8" line array speaker with a transparent sound that is especially suitable for medium to large configurations with a frequency range of 70 Hz - 19 kHz.

This dual speaker system contains one high-efficiency neodymium bass speaker on each side with a power rating of 500 W (continuous) respectively. The two neodymium HF drivers with a 1.35" voice coil and protection circuit connected to 1" wave guides are designed to handle maximum outputs of 150 W (continuous) respectively. The individual elements are capable of covering an area of 120° x 10° with an extensive frequency range.

The cabinet of the VA8 is made of 15mm birch plywood and coated with a durable, waterproof Dura-Coat LX finish. Each cabinet has Neutrik NL-4 connectors and flying points and can be set to angles between 0° and 6° in 1° increments. Thus the VA8 can be both flown and used as a ground stack.

For example, the dual-loaded 18" V218B subwoofer or the 2 x 15” bass-reflex V215B subwoofer are ideal expansions for the low bass range. On our website, you will find corresponding EASE GLL files and controller setups for the LD Systems DPA260 speaker processor for optimal array planning and trouble-free installation.


Product number: LDVA8
Product type: Line Array Speaker
Type: passive
Design: 2-way speaker
Woofer characteristics  
Low/mid driver dimensions (mm): 2 x 203.2mm
Low/mid driver dimensions: 2 x 8"
Woofer magnet: Neodymium
Woofer brand: Custom-made
HF Driver characteristics  
Horn: Waveguide
HF driver dimensions: 2 x 1"
HF driver dimensions (mm): 2 x 25.4mm
HF driver magnet: Neodymium
HF driver brand: Custom-made
HF driver voice coil: 1.35"
HF driver voice coil (mm): 34.3mm
other features  
Dispersion (H x V): 100 x 10°
Load rating (RMS): 500W
HF driver RMS power: 150W
Frequency response: 70 - 19000Hz
Min. crossover frequency (Hz): 1600Hz
SPL (1W/1m): 93dB
Max. SPL: 120dB
Impedance: 16Ohm(s)
Loudspeaker protection: HF Driver
Tilt angle: 0 / 1 / 2 / 3 / 4 / 5 / 6°
Loudspeaker inputs: Neutrik Speakon, 4-pole
Speaker output connections: Neutrik Speakon, 4-pole
Cabinet material: 18 mm Birch Plywood
Cabinet surface: Dura Coat LX Texture Paint
Cabinet construction: vented
Width: 740mm
Height: 247mm
Depth: 467mm
Weight: 27.5kg
Features: Integral rigging hardware, ergonomically shaped insert handles

Coming soon




 

Untitled Document