Prev   Next

VA 4

The LD Systems VA4 is a lightweight, ultra compact 2 x 4" line array speaker cabinet for configurations with an 80Hz - 19kHz frequency response. The dual 4" woofers with high efficiency neodymium magnets and Kevlar cones have a power handling capacity of 200W continuous. Coupled to a 1" waveguide, the neodymium high frequency compression driver features a 1.35" voice coil, protection circuit and a 75W continuous rating. Individual element dispersion is 120° x 10° over a wide frequency range.

The VA4 cabinet is made from 12mm birch ply painted in hard-wearing, water-resistant Dura-Coat LX. It is equipped with Neutrik NL-4 connectors, rigging hardware and easy angle adjustment from 0° to 7.5° in three 2.5° steps. The VA4 is designed both for flying and ground stack applications.

For low frequency extension the dual 12“ Bandpass subwoofer V212B and the V215B 2x15” Bass reflex subwoofer perfectly complement the VA4. Ease GLL-files and controller setups for the LD Systems DPA260 are available online for optimum array configuration and easy startup.

Product number: LDVA4
Product type: Line Array Speaker
Type: passive
Design: 2-way speaker
Woofer characteristics  
Low/mid driver dimensions (mm): 2 x 101.6mm
Low/mid driver dimensions: 2 x 4"
Woofer type: Kevlar
Woofer magnet: Neodymium
Woofer brand: Custom-made
HF Driver characteristics  
Horn: Waveguide
HF driver dimensions: 1"
HF driver dimensions (mm): 25.4mm
HF driver magnet: Neodymium
HF driver brand: Custom-made
HF driver voice coil: 1.35"
HF driver voice coil (mm): 34.3mm
other features  
Dispersion (H x V): 120 x 10°
Load rating (RMS): 200W
HF driver RMS power: 75W
Frequency response: 80 - 19000Hz
Min. crossover frequency (Hz): 2100Hz
SPL (1W/1m): 90dB
Max. SPL: 113dB
Impedance: 16Ohm(s)
Loudspeaker protection: HF Driver
Tilt angle: 0 / 2.5 / 5 / 7.5°
Loudspeaker inputs: Neutrik Speakon, 4-pole
Speaker output connections: Neutrik Speakon, 4-pole
Cabinet material: 18 mm Birch Plywood
Cabinet surface: Dura Coat LX Texture Paint
Cabinet construction: vented
Width: 480mm
Height: 139mm
Depth: 261mm
Weight: 9.6kg
Features: Steel handles, Integral rigging hardware

Coming soon


Untitled Document