Next

PMA-2020AE


  • Advanced UHC-MOS Single Push-Pull Circuit

  • Ultra High Current MOS with greater current capacity

  • Dual FET + Cascade Bootstrap Circuit

  • Twin transformers with leakage cancelling mount

  • Chassis construction with 6 independent blocks

  • Vibration-resistant Design with Direct Mechanical Ground Construction

  • PRE OUT port

  • Power Amp Direct

  • Auto-standby for Reduced Power Consumption


Power supply AC 230 V, 50/60 Hz
Power consumption 360 W
Power consumption in standby mode 0.2W
Dimensions (W x H x D) 434.0 x 181.5 x 434.2 mm
Weight 24.4 kg
Power amplifier section
Rated output 80 W + 80 W (8 Ω, 20 Hz - 20 kHz, THD 0.07%), 160 W + 160 W (4 Ω, 1 kHz, THD 0.7%)
Total harmonic distortion 0.01% (rated output -3 dB, 8 Ω, 1 kHz)
Input sensitivity / Impedance Power Amp Direct : 0.9 V/47 kΩ
Preamplifier section
Phono equalizer rated output 150 mV (REC out terminal)
Input sensitivity / Impedance Line : 135 mV / 47 kΩ (Source direct OFF), Phono MM : 2.5 mV / 47 kΩ, Phono MC : 200 μV / 100 Ω
RIAA deviation Phono : 20 Hz - 20 kHz, ±0.5 dB
Signal-to-noise ratio (IHF A network)
Line 108 dB (Source Direct: ON)
Phono MM 89 dB (input terminals shorted, input signal 5 mV)
Phono MC 74 dB (input terminals shorted, input signal 0.5 mV)
Tone controls
Bass 100 Hz, ±8 dB
Treble 10 kHz, ±8 dB
IN Ports
Phono (MM/MC) 1
CD 1
Tuner 1
AUX 1
NETWORK 1
Recorder-1 (Playback) 1
Recorder-2 (Playback) 1
Power amp direct 1
OUT Ports
Recorder-1 (REC) 1
Recorder-2 (REC) 1
Preout 1
 

Coming soon


Coming soon




 

Untitled Document