SP 6K

PA POWER AMPLIFIER 2 X 2950 W 2 OHM

The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether you’re starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, you’ll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.


  • Product Information

    • Specifications

      Product type: Power Amplifiers
      Type: PA Power Amplifiers
      Rated ouput power (1kHz @ 2 Ohms): 2 x 2950W
      Rated ouput power (1kHz @ 4 Ohms): 2 x 2025W
      Rated ouput power (1kHz @ 8 Ohms): 2 x 1250W
      Rated ouput power (1kHz @ 4 Ohms, bridged): 3900W
      Rated ouput power (1kHz @ 8 Ohms, bridged): 5900W
      Output circuitry: Class H
      Frequency response: 20 - 20.000Hz
      THD: < 0.05 %
      Signal-to-noise ratio: 118dB
      Damping factor: > 500
      Crosstalk: >75dB
      Gain: 26 / 32 / 38dB
      Input sensitivity: 5.0 / 2.5 / 1.3V
      Protection circuits: power supply overload, PMS, soft start, short circuit, thermal protection, mute when turning on, ICL (Intelligent Clip Limiting), Open or mismatched loads
      Controls: ICL on/off, gain, Subsonic Filter 30Hz/50Hz, volume, Subsonic Filter On/Off, dual/link switch, bridge/stereo mode selector, mains switch (on/off)
      Indicators: PMS, High temperature, Signal, ICL (Intelligent Clip Limiting)
      Line inputs: 2
      Line input connectors: XLR
      Line output connectors: XLR
      Loudspeaker outputs: 2
      Speaker output connections: Speakon
      Cooling: 2 fans, temperature controlled
      Operating voltage: 230 V AC, Switching power supply, 220 V AC - 240 V AC, 50-60 Hz
      Width: 483mm
      Height: 89mm
      Depth: 310mm
      Weight: 8,6kg

    • Downloads