DJ 500

PA POWER AMPLIFIER 2 X 250 W 4 OHMS

LD Systems DJ500 Power Amplifier
The DJ500 is a powerful, full-featured Class AB power amplifier with an output of 250W per channel @ 4 ohms and 500W in switchable bridge mode. It is especially suitable for mobile use by DJs and smaller bands and in permanent installations.

The DJ500 has extensive protection circuitry and a power-on delay. The half perforated front panel and a low-noise fan keep the amp cool. XLR and stereo TRS sockets are used as inputs and Speakon-compatible sockets and heavy-duty screw terminals as outputs. A ground lift switch helps eliminate ground loop hum. LEDs on the front panel next to the easy-grip volume controls indicate functional status, overloading, and triggering of the protection circuit.

The DJ500 functions in the entire frequency range of 20Hz – 20kHz with extremely high dependability, dynamics, and impulse fidelity.


  • Product Information

    • Specifications

      Product type: Power Amplifiers
      Type: PA Power Amplifiers
      Rated ouput power (1kHz @ 4 Ohms): 2 x 250W
      Rated ouput power (1kHz @ 8 Ohms): 2 x 150W
      Rated ouput power (1kHz @ 8 Ohms, bridged): 500W
      Output circuitry: Class A/B
      Frequency response: 20 - 20000Hz
      THD: 0.05%
      Gain: 30dB
      Input sensitivity: 0.85V
      Protection circuits: short circuit, over-current, soft start, thermal overload, DC
      Controls: On / Off, volume, mode, ground lift
      Indicators: clip, Protect (protection circuit engaged), Power
      Line inputs: 2
      Line input connectors: 6.3 mm jack, XLR
      Loudspeaker outputs: 2
      Speaker output connections: Speakon compatible, Terminal posts
      Cooling: fan
      Operating voltage: 230 V AC
      Width: 483mm
      Height: 88mm
      Depth: 298mm
      Weight: 9kg

    • Downloads